Process flow for developing CC-Link IE TSN compatible products
Development procedure for CC-Link IE TSN compatible products.
Steps when considering development
- *Some of the items to be considered during development are different for recommended wiring components, such as switches, cables, and connectors.
- *"SDK" is an abbreviation for Software Development Kit.
1. Select the station type
Master station
A station that manages a network. A station that contains control information (parameters) and controls slave stations* and other master stations through cyclic transmission and transient transmission.
* Slave stations : A general term other than master stations such as local stations and remote stations.
Local station
A station capable of n:n cyclic transmission with the master station and other local stations, 1:n cyclic transmission with other stations, and transient transmission with other stations. It has a server function and client function for transient transmission.
Remote station
A station capable of 1:n cyclic transmission, and transient transmission with other stations.It has a server function and client function for transient transmission.
2. Select the certification class
- The CC-Link IE TSN network has different certification classes depending on the functions and performance of thedevice (node) and switch.
- Certification classes include A and B, with B being the higher function.
Device
-
It is generally recommended to develop certification class B products that have a wide variety of applications.
Develop certification class A products only when modifying the software of existing (non-TSN compatible) products.
- *11 port : Reception, More than 2 port : Reception and relay
- *2Communication speed does not matter as long as it is 100 Mbps or more
- *3Implementation is required for local stations
- *4In the case of a system that guarantees time synchronization accuracy of 1 μs, it consists of only products of certification class B.
In this case, products of certification class A (including switches) shall not be placed between products of certification class B.
Switches
- *Supports either 1000BASE or 100BASE, or both
3. Select the development method
Extensive lineup of supported products
Various types of product development are supported, from high-performance devices implemented on dedicated ASIC/FPGA to low-cost devices implemented on general-purpose Ethernet chips using software protocol stacks.
Development using methods provided by CLPA partners
- Hardware : Achieved with communication LSI / PC board / Built-in module
- Software : Achieved with SDK
| No | Product category | Type | Contents |
|---|---|---|---|
| 1 | Dedicated Communication LSI | Hardware | Based on the interface specifications of the released communication LSI, users can mount it on the board to support CC-Link IE TSN. |
| 2 | Embedded Module | Hardware | Compatible with CC-Link IE TSN by connecting the user board and embedded interface board with a general-purpose bus (16 bit parallel bus etc.). |
| 3 | PC board | Hardware | Compatible with CC-Link IE TSN by connecting to the PCI or PCI Express interface. |
| 4 | SDK | Software | Compatible with CC-Link IE TSN by implementing the released software into devices supported general-purpose Ethernet communication. |
4. Select the development location
CC-Link IE TSN development support tool manufacturers
List of partners that offer CC-Link IE TSN development support tools
Development methodCompany |
Station Type |
Certification Classes A or B |
|
|
|---|---|---|---|---|
 |
Master/ Local station |
B | ● | |
| Master station |
B | ● | ||
| Remote station |
B | ● | ||
| A | ● | |||
 |
Master station |
A / B | Coming soon | |
| Remote station |
A | Coming soon | ||
 |
Remote station |
B | ● | |
 |
Remote station |
A / B | Coming soon |
Embedded module or PC board are under consideration by partners.
For details, contact the CC-Link Partner Association.
The partners that are considering development are as follows.
- CC-Link Partner Association (CLPA)
Members Site 
